Logga in...

Aktiv hållare för fast installation

Passar enhet med stort eller litet batteri.

Använder du en Komradio varje dag i ditt arbete? Då kommer en aktiv hållare från Brodit att göra dina dagar mycket enklare! Genom att ha enheten i en aktiv hållare, kommer du alltid att ha den inom bekvämt räckhåll när du kör mellan jobben. Kablarna ansluts innanför instrumentbrädan, det ger en snygg montering utan lösa kablar hängande över instrumentbrädan. Monteras på ProClip Monteringsplattform.

Laddata:

Charging Specifications:   
Battery Chemistry: Li-ion or Li-Poly batteries   
Input Voltage: 11-30 V   
Charging Voltage: 8.4 V   
Timer for Max. Charging Time: Automatic, stops at 8.4 V   
Max. Charging Time: 2-3 hours depending on battery capacity   
Rapid Charge: 1,0 A +/- 10%   
Trickle Charge: 0 to 50 mA   
LED Charging Indicator: LED Red to Green indicator   
Temperature Control: Controlled by battery   
Operating Temperature: -40 to 50 °C (can be restricted by battery chemistry)   
RoHS Compliant: Yes   
Input Transient Protected: Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming supply.   
Output Short Circuit Protected: The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

  • Artikel nr: 732025
  • EAN: 7320287320251

Artikel nr 732025 passar till:

  • ICOM IP100H
  • ICOM IP501H
MONTERINGSANVISNING

Charging Specifications:
Battery Chemistry: Li-ion or Li-Poly batteries
Input Voltage: 11-30 V
Charging Voltage: 8.4 V
Timer for Max. Charging Time: Automatic, stops at 8.4 V
Max. Charging Time: 2-3 hours depending on battery capacity
Rapid Charge: 1,0 A +/- 10%
Trickle Charge: 0 to 50 mA
LED Charging Indicator: LED Red to Green indicator
Temperature Control: Controlled by battery
Operating Temperature: -40 to 50 °C (can be restricted by battery chemistry)
RoHS Compliant: Yes
Input Transient Protected: Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming supply.
Output Short Circuit Protected: The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

Sätt din hållare på ett ProClip!

Du behöver två delar; ett ProClip till din bil, och en hållare till din enhet. Hitta rätt ProClip till din bil här: